Energy Solar

Brion Solenergi and DSV Construct 14 MW Solar Array

Brion Solenergi and DSV are collaborating on the construction of a 14 MW rooftop solar array on Sweden’s largest warehouse, with DSV financing the project and CPX assisting in the installation process using helicopters instead of cranes to expedite the lifting of materials to the roof in just 10 days, ultimately reducing the warehouse’s electricity consumption to 25% and aligning with recent EU legislation mandating the integration of solar installations into future building works.

At a glance

  • Brion Solenergi and DSV are constructing a 14 MW rooftop solar array on Sweden’s largest warehouse.
  • DSV, a Danish transport company, is financing the solar installation.
  • CPX, a Netherlands-based mounting system specialist, is assisting with the project.
  • Helicopters are being used to lift the solar panels into place, a more cost-effective method than using cranes.
  • Upon completion, DSV’s warehouse will only require 25% of the electricity generated, with surplus electricity being stored in batteries or sold back to the grid.

The details

Brion Solenergi and DSV are constructing a 14 MW rooftop solar array.

This project is on Sweden’s largest warehouse.

DSV, a Danish transport company, is financing the solar installation.

Assistance from CPX

CPX, a Netherlands-based mounting system specialist, is assisting.

Helicopters are being used to lift the solar panels into place.

This method is considered more cost-effective than using cranes.

The lifting process is expected to be expedited.

Materials will be lifted to the roof in just 10 days.

This is a significant improvement over the estimated three months with cranes.

Upon completion, DSV’s warehouse will only require 25% of the electricity generated.

The surplus electricity will be stored in batteries or sold back to the grid.

This initiative aligns with recent EU legislation.

Solar Installations in Europe

The legislation mandates the integration of solar installations into future building works.

However, member states have not been meeting the demand for rooftop solar installations.

Sweden’s combined solar capacity has exceeded 4 GW.

The Solar and Storage Industries Institute (SI2) has released a model policy.

This policy advocates for automated rooftop solar permitting software.

The United States has achieved a milestone of 5 million solar installations.

Over 97% of these installations are on residential rooftops.

The model policy aims to lower the cost of rooftop solar permitting and inspection.

It standardizes, streamlines, and automates the permitting process.

States can use a template to encourage local governments to adopt the software.

The National Renewable Energy Laboratory has developed SolarAPP+.

This software has been adopted by 183 communities.

It has processed 41,000 solar permits and saved 33,000 hours of government staff time.

The model legislation includes provisions to prevent unreasonable restrictions on solar systems.

It limits solar permitting charges to actual costs.

Applicants can seek variances.

Projects in Western Pennsylvania

Jones Power has been selected by Babcock & Wilcox Solar Energy for two 25-MW projects.

These projects are in Western Pennsylvania.

Construction began in March 2024 and is expected to be completed by summer 2024.

Jones Power’s scope of work includes erosion control, clearing, and construction entrances.

B&W Solar has the option to retain a Jones Power crew for additional support services.

John Clark, CEO of Jones Power, expressed enthusiasm about the collaboration.

He highlighted the company’s experience in the Mid-Atlantic region.

He also emphasized its commitment to renewable energy initiatives in Western Pennsylvania.

Article X-ray


Facts attribution

This section links each of the article’s facts back to its original source.

If you suspect false information in the article, you can use this section to investigate where it came from.

pv-magazine.com
– Brion Solenergi is building a 14 MW rooftop solar array on Sweden’s largest warehouse
– The warehouse belongs to Danish transport company DSV, which is financing the solar installation
– CPX, a Netherlands-based mounting system specialist, is helping Brion Solenergi set up the solar facility
– Helicopters are being used to lift the panels into place, as they are more cost-effective than cranes
– The method of using helicopters will complete the lifting of material to the roof in 10 days, compared to an estimated three months with cranes
– DSV’s warehouse will only require about 25% of the electricity to be entirely self-sufficient
– The rest of the electricity will be stored in batteries to charge electric vehicles or sold back to the local electricity grid
– In March, the European Parliament approved legislation to require EU member states to integrate solar installations into future building works
– Climate Action Network Europe reported that member states have not been keeping up with demand for rooftop solar
– Sweden’s combined solar capacity surpassed 4 GW at the end of last year
solarpowerworldonline.com
– Solar and Storage Industries Institute (SI2) released model policy for automated rooftop solar permitting software
– U.S. has hit 5 million solar installations, with over 97% on residential rooftops
– Model policy aims to lower cost of rooftop solar permitting and inspection
– States can use template to encourage local governments to adopt automated rooftop solar permitting software
– Software standardizes, streamlines, and automates permitting process
– David Gahl, executive director of SI2, emphasizes importance of efficient rooftop solar permitting process
– National Renewable Energy Laboratory developed SolarAPP+, an automated rooftop solar permitting software
– SolarAPP+ has been adopted by 183 communities, processing 41,000 solar permits and saving 33,000 hours of local government staff time
– Model legislation includes provisions to prevent unreasonable restrictions on residential solar systems and energy storage systems
– Legislation limits solar permitting charge to actual cost and allows applicants to seek variances
– Model policy is the second released by SI2 under their Center for Model Policy Development, following large-scale solar siting policy last fall
solarpowerworldonline.com
– Jones Power selected by Babcock & Wilcox Solar Energy for civil construction scope on two 25-MW utility-scale solar projects in Western Pennsylvania
– Construction on the projects began in March 2024 and is set to be completed in summer of 2024
– Jones Power’s scope includes erosion control, clearing, grubbing, construction entrances, culverts, earthwork, stone access roads, stone laydown yards, final seeding, and post-civil site maintenance
– B&W has the option for a Jones Power post-civil site maintenance crew to remain onsite throughout pile driving, racking, modules, electrical, and commissioning to provide support services
– Jones Power CEO John Clark expressed excitement about taking on the projects with B&W Solar
– Jones Power has experience in the Mid-Atlantic region and is looking forward to contributing to bringing more renewable energy to Western Pennsylvania.

What's your reaction?

Excited
0
Happy
0
In Love
0
Not Sure
0
Silly
0

You may also like

Comments are closed.

More in:Energy Solar